3 Stage Standard Reverse Osmosis System 50, 75, 100 & 150 Gallons Per Day

Our 3 Stage Standard Reverse Osmosis System is a full sized RO system designed to produce pure Reverse Osmosis water suitable for use in all applications where pure water is required, such as aquariums and reef life, hydroponics and many more applications. With the option of producing 50, 75, 100 and 150 Gallons Per Day, this Reverse Osmosis system will remove an average of 97 – 99% of tap water contaminants.

This Reverse Osmosis system comes with two pre-filtration stages. The first stage your tap water will pass through is a sediment filter which will remove and reduce sediments including rust, dirt, silt and sand etc. The second stage is a carbon block filter which will remove chlorine and other volatile organic impurities. After these two pre-filtration stages, your water will pass through the Reverse Osmosis membrane where the main filtration will take place. This will reduce and remove between 97 – 99% of contaminants.

This system is fitted with a pressure gauge as this is critical for system maintenance and problem solving. Should you encounter any issues with your system, the PSI reading is vital to solve any potential problems that might arise.

This system also comes with a flush kit fitted as standard. Flushing the system regularly will extend the life of the Reverse Osmosis membrane by keeping this free from the build up of impurities and contaminants.

All our Reverse Osmosis Systems come fully tested and ready for use with all the necessary components as well as an installation guide. This guide will provide all the information required for quick and easy installation and maintenance. Our installation guide can be found here.

This system includes the Reverse Osmosis filters and membrane. We recommend replacing the filters every 6 months and replacing the membrane every 1-5 years when the TDS levels rise. Replacement filter sets for this system can be found here. Replacement membranes can be found here.