Description
Demineralization resins are used to reduce the Total Dissolved Solids (TDS), effectively polishing the water. The TDS from a Reverse Osmosis system is not always as low as necessary, so by using DI resin this will bring the TDS down to an almost zero TDS reading.
This deionisation resin is suitable for use in a range of applications and industries including reverse osmosis, window cleaning, car washing, dental practices, photographic labs as well as use in laboratories and hospitals.
RO-Man use a high quality mixed bed DI resin to ensure a high consistent performance over a longer time frame.
The cartridges can come pre-filled with resin or can be left empty.
Specifications:
- Material: Mixed Bed Deionisation Resin
- Sizes: Inline, 10 Inch, 20 Inch
- Maximum Water Temp: 125°F or 51°C
- Micron Rating: 10, 20, 50
- Maximum Operating Pressure: 80 PSI
- Filtration Life Span: Up to 6 months
Brian Garrod (verified owner) –
rubber seal on top was thinner and did not seal when filter housing was tightened causing poor TDS. had to use old seal
steven punchard (verified owner) –
Excellent
Alan James (verified owner) –
Have a very old RO man unit 100gpd 6 stage and have never needed or wanted to use any other company for spares or repairs. The unit I have is probably close to 20 years old little has changed apart from the internals and some hose connections and hose and I still achieve 3ppm even off of just mains pressure and 12 ppm if I bypass the post membrane resin filter. Can’t fault the equipment or the service I have received over the years.
Howard Jenkins (verified owner) –
I have used in the past di resin I and always bought from
Ro-man one thing you can guarantee is quality
JOHN ASHER (verified owner) –
Great product
Steve F. (verified owner) –
Perfect for the job.