Dental Reverse Osmosis System with Tank and Faucet

Description

The system has a flush kit fitted as standard, this will help maintain the membrane in good condition extending the life of the reverse osmosis membrane (some suppliers say it will extend the life up to 5 years).

There is also a 1000 gallon DI unit installed on the system so that the output water will have near 0 TDS perfect for the dental industry but also ideal for lab water and salt water fish keepers.

This unit will remove an average 97-99% of tap water contaminants.

We have included a slimline storage tank and faucet tap for the on demand needs this unit will be required to deal with.

 

The 4 Stages of Filtration Are:

1. A 5 Micron Spun Sediment Filter made of 100% pure polypropylene fibres. Removes dirt, sand and rust.
2. A Carbon Block Filter composed of high performance carbon. Removes trihalomethanes, pesticides, volatile organic chemicals and 99.95% of giardia and cryptosporidium cysts.
3. An American manufactured high rejection reverse osmosis membrane with high capacity. This membrane removes contaminants present in your water including, up to 99% of dissolved salts, lead, copper, barium, bacterial by-Products, oestrogen and silica to mention but a few.
4. Full size 700 ml DI resin chamber.

 

The systems is complete with all fittings including:

• Self Cleaning Reverse Osmosis Membrane
• 5 Micron Spun Sediment filter
• Carbon block filter,
• Filled Deionisation Resin 750ml Cartridge (filled)
• Fitted Flush bypass valve kit
• Auto shut off
• 2 Metres of Green, Blue and Red 1/4 inch tubing
• Filter wrench
• Waste clamp
• 2.2 Gallon tank
• Faucet tap
• Upgraded installation kit

 

Dimensions:

System: 440mm high X 560mm wide X 380mm

 

This system uses 1/4 inch pipe and fittings.

 

Gallons Per Day (GPD)
This refers to US gallons per day.  One US Gallon is equal to 0.832674 Imperial Gallon. For example: 1 US Gallon = 0.832674 Imperial Gallons, 50 US Gallons = 41.63 Imperial Gallons, 75 US Gallons = 62.45 Imperial Gallons, 100 US Gallons = 83.27 Imperial Gallons and 150 US Gallons = 124.90 Imperial Gallons.

 

System and Membrane Warranty

Need a TDS Meter?

The DM1 is an inline TDS Meter can be used to measure the TDS of the tap water coming in against the TDS of the purified water going out of your system at anytime.  You can view it here.