Drinking Water 6 Stage Purification System

(1 customer review)

£255.36£285.96 including VAT

Our Drinking Water 6 Stage Purification System is a complete filtration system providing high quality, pure water. This system will clean and purify your tap water to ensure high quality water for your morning coffee, preparing and cooking food as well as rehydrating after exercise. Drinking water is an essential component for a healthy life and our 6 Stage System will ensure your drinking water supply produces excellent water for every use.

This system is essential for anyone concerned about their health along with their family’s health. With aging water infrastructures as well as contaminations scares, the levels of chemicals and contaminants in tap water vary greatly. We have designed and manufactured a complete purification system for drinking water which will filter out a range of contaminants including rust, chlorine, pesticides, lead, oestrogen and fluoride.

This system comes with 6 stages of filtration. The first stage of the filtration process is a 10 inch sediment filter. This filter is made from 100% pure polypropylene and has an extra high capacity. This pre-filter will remove and reduce sediments, including rust, dirt, silt and sand. The second stage of the filtration process is a 10 inch GAC filter. This filter is made from high performance activated carbon. This pre-filter will remove and reduce chlorine, odour, organic contaminants, pesticides and chemicals. The third stage is a 10 inch carbon block filter which is made from high performance carbon. This final pre-filter will remove any remaining chlorine and other volatile organic contaminants and 99.95% of giardia and cryptosporidium cysts.

Once the pre-filtration stages have taken place you water will pass through the 50 GPD Reverse Osmosis membrane where the main filtration will take place. This will reduce and remove between 97 – 99% of contaminants. The final two stages will improve the taste, odour and mineral content of your water. The fifth stage is an inline carbon taste and odour filter. This high quality filter will improve the taste and odour of your drinking water. The final stage is the remineralising filter. This filter will add ‘good’ minerals back into your water including magnesium and calcium while rebalancing the pH of the water.

This high quality system is expertly manufactured using water safe products.

All our water filtration systems come fully tested, with filter and membranes installed. The system will be ready for use with all the necessary components as well as an installation guide. This guide will provide all the information required for quick and easy installation and maintenance. Our installation guide can be found here.

The system includes the filters and membranes as well as a storage tank. We recommend replacing the filters every 6 months to ensure uninterrupted, high quality, pure water.

 

Description


The Drinking Water 6 Stage System includes:

  • 3 x 10 inch Filter Housings (including O Rings)
  • 10 inch Membrane Housing
  • Reverse Osmosis Membrane
  • 10 inch 5 Micron Spun Sediment Filter
  • 10 inch GAC Filter
  • 10 inch Carbon Block Filter
  • Inline Taste and Odour Filter
  • Inline Remineralising Filter
  • Bracket to mount the unit to the wall
  • Flow Restrictor
  • Flush Kit
  • Pressure Gauge
  • 2 Metres of Green ¼ inch Tubing
  • 2 Metres of Blue ¼ inch Tubing
  • 2 Metres of Red ¼ Tubing
  • Tank
  • Fitting Connection of your choice
  • Installation Guide

 

System Specifications:

  • System Dimensions: 44cm High x 36cm Wide x 18cm Deep
  • Tank Dimensions: 42cm High x 30cm Diameter
  • Water Connections: 1/4 inch
  • Working Temp: 4°C – 38°C (40°F – 100°F)
  • Operating Pressure: 0 PSI – 80 PSI
  • Typical Rejection Rate: 97-99% TDS Total Dissolved Solids
  • TDS: 1500 MG/L
  • pH Range: 3.0 -13.0
  • Hardness (CACO): <350 MG/L (<20 GPG)
  • Iron: <0.1 MG/L
  • Turbidity: <1.0 NTU
  • Manganese: <0.05 MG/L
  • Hydrogen Sulfide (H2S): 0.00 MG/L
  • Chlorine (CL2): 0.00 MG/L

 

Gallons Per Day (GPD)
This refers to US gallons per day. One US Gallon is equal to 0.832674 Imperial Gallon. For example: 1 US Gallon = 0.832674 Imperial Gallons, 50 US Gallons = 41.63 Imperial Gallons, 75 US Gallons = 62.45 Imperial Gallons, 100 US Gallons = 83.27 Imperial Gallons and 150 US Gallons = 124.90 Imperial Gallons.

System and Membrane Warranty

All our systems and membranes come with a 1 year warranty from the date of purchase. This warranty excludes expendable filter cartridges and resins.  Read more here.

Need a TDS Meter?

The DM1 is an inline TDS Meter can be used to measure the TDS of the tap water coming in against the TDS of the purified water going out of your system at anytime.  You can view it here.


Additional information

Pump Option

Non-Pumped, Pumped

Water Connection Type

Garden Tap, Hose Connection, Needle Valve, Self Cutting Tap with RO Connector

1 review for Drinking Water 6 Stage Purification System

  1. Kathy (verified owner)

    Always quality and good service

Only logged in customers who have purchased this product may leave a review.