Description
Installation and replacement procedure:
- Turn off cold water supply.
- Remove tubing from ends of old filter. It is not unusual for some water drops to be present while removing the old filter.
- Discard old filter safely.
- Remove the protective cap on the top of the filter.
- Align filter with water direction.
- Insert tubing into inlet until tubing stops. Always ensure end of tubing are square and free from burrs.
- Push on collet clip if necessary.
- It is important to properly flush the filter before connecting tubing to outlet. Flush the filter through for 5 minutes into bucket.
- Turn water supply back on to flush filter thoroughly,.
- Insert tubing into filter outlet and push on collet clip if provided.
Inline Filter
- High Quality Inline Carbon Filter: This filter will remove Chlorine, many pesticides and organic chemicals from the water as well as improving the taste and odour of the water for drinking and ice making, each filter comes with built in push fitting for simple
Andrew Hodson (verified owner) –
Just what I needed.