4 Stage Standard Reverse Osmosis System 50, 75, 100 & 150 Gallons Per Day
£134.78 – £180.14 including VAT
Our 4 Stage Standard Reverse Osmosis System is a full sized RO system designed to produce pure Reverse Osmosis water suitable for use in all applications where pure water is required, such as drinking water, aquariums and reef life, hydroponics, window cleaners, car detailing and many more applications. With the option of producing 50, 75, 100 and 150 Gallons Per Day, this Reverse Osmosis system will remove an average of 97 – 99% of tap water contaminants.
This Reverse Osmosis system comes with three pre-filtration stages. The first stage your tap water will pass through is a sediment filter which will remove and reduce sediments including rust, dirt, silt and sand etc. The second stage is a carbon block filter which will remove chlorine and other volatile organic impurities. The third stage is a granulated active carbon filter which will remove any remaining aesthetic contaminants to improve the taste, odour and colour of your water. After these three pre-filtration stages, your water will pass through the Reverse Osmosis membrane where the main filtration will take place. This will reduce and remove between 97 – 99% of contaminants.
This system is fitted with a pressure gauge as this is critical for system maintenance and problem solving. Should you encounter any issues with your system, the PSI reading is vital to solve any potential problems that might arise.
This system also comes with a flush kit fitted as standard. Flushing the system regularly will extend the life of the Reverse Osmosis membrane by keeping this free from the build up of impurities and contaminants.
All our Reverse Osmosis Systems come fully tested and ready for use with all the necessary components as well as an installation guide. This guide will provide all the information required for quick and easy installation and maintenance. Our installation guide can be found here.
This system includes the Reverse Osmosis filters and membrane. We recommend replacing the filters every 6 months and replacing the membrane every 1-5 years when the TDS levels rise. Replacement filter sets for this system can be found here. Replacement membranes can be found here.
Description
The 4 Stage Standard Reverse Osmosis System includes:
- 3 x 10” Transparent Filter Housings (including O Rings)
- 10” Membrane Housing
- Reverse Osmosis Membrane
- 5 Micron Spun Sediment Filter
- Carbon Block Filter
- Granulated Active Carbon Filter (GAC)
- Flush Kit
- Flow Restrictor
- Pressure Gauge
- 2 Metres of Green 1/4 inch Tubing
- 2 Metres of Blue 1/4 inch Tubing
- 2 Metres of Red 1/4 inch Tubing
- Fitting Connection of your choice
- Installation Guide
System Specifications:
- Dimensions: 39cm High x 43cm Wide x 15cm Deep
- Water Connections: 1/4 inch
- Working Temp: 4°C – 38°C (40°F – 100°F)
- Operating Pressure: 0 PSI – 80 PSI
- Typical Rejection Rate: 97-99% TDS Total Dissolved Solids
- TDS: 1500 MG/L
- pH Range: 3.0 -13.0
- Hardness (CACO): <350 MG/L (<20 GPG)
- Iron: <0.1 MG/L
- Turbidity: <1.0 NTU
- Manganese: <0.05 MG/L
- Hydrogen Sulfide (H2S): 0.00 MG/L
- Chlorine (CL2): 0.00 MG/L
Gallons Per Day (GPD)
This refers to US gallons per day. One US Gallon is equal to 0.832674 Imperial Gallon. For example: 1 US Gallon = 0.832674 Imperial Gallons, 50 US Gallons = 41.63 Imperial Gallons, 75 US Gallons = 62.45 Imperial Gallons, 100 US Gallons = 83.27 Imperial Gallons and 150 US Gallons = 124.90 Imperial Gallons.
All our systems and membranes come with a 1 year warranty from the date of purchase. This warranty excludes expendable filter cartridges and resins. Read more here.
Need a TDS Meter?
The DM1 is an inline TDS Meter can be used to measure the TDS of the tap water coming in against the TDS of the purified water going out of your system at anytime. You can view it here.
Only logged in customers who have purchased this product may leave a review.
Gary Fisher (verified owner) –
Works efficiently
Basil (verified owner) –
Excellent, no issues.