Installation and replacement procedure:
- Turn off cold water supply.
- Remove tubing from ends of old filter. It is not unusual for some water drops to be present while removing the old filter.
- Discard old filter safely.
- Remove the protective cap on the top of the filter.
- Align filter with water direction.
- Insert tubing into inlet until tubing stops. Always ensure end of tubing are square and free from burrs.
- Push on collet clip if necessary.
- It is important to properly flush the filter before connecting tubing to outlet. Flush the filter through for 5 minutes into bucket.
- Turn water supply back on to flush filter thoroughly,.
- Insert tubing into filter outlet and push on collet clip if provided.
Our options include:
Water Connection
- 15mm Brass Compression Tee: with washing valve and tap connector (this creates a professional secure pipe clamp and will require the water to be isolated prior to fitting and may require plumbing experience)
- 3/4 inch Tap Connector: fits on most garden taps, most hose pipe fittings and also to a washing machine isolator tap. This will fit standard 1/4″ pipe / 6 mm.
- 15mm Push Fit Washing Machine Valve 3/4 inch Male Thread: ideal for connecting to copper pipe if you have a copper pipe free then no plumbing experience required.
- Self Cutting Tap: this fitting makes a really secure connection without need for plumbing experience.
- Self Piercing Needle Valve: for simple connection without any need for plumbing experience.
- Inline Connection to Flexible Pipe: chrome plated brass fitting for joining to flexible pipe.
Fridge Connection
- 1/4 to 1/4 inch Straight Push Fit Connection: to connect easily and securely to the pipe currently on the fridge.
- 3/4 to 1/4 inch Straight Push Fit Connection: for a larger connection.
Inline Filter
- High Quality Inline Carbon Filter: This filter will remove Chlorine, many pesticides and organic chemicals from the water as well as improving the taste and odour of the water for drinking and ice making, each filter comes with built in push fitting for simple installation and to remove any chance of leaks due to mis-installation.
Other Fittings
- 1/4 inch Ball Valve: to isolate the fridge for maintenance.